How To Apply Vehicle Decals

Starring:

Lookout Lisa, Kidvegas19 & Hilo

Vehicle Decal Tips:

✔ Choose the Right Spot – Pick a clean, smooth surface like your car’s window or body panel. Avoid placing it over seams or textured areas.

✔ Clean Thoroughly – Use soap and water (or rubbing alcohol) to remove dirt, dust, and oils. Let it dry completely before applying the decal.

✔ Peel Carefully – Slowly remove the backing, making sure the decal stays on the clear transfer tape.

✔ Align Before Sticking – Hold the decal up to the spot before pressing it down to ensure proper placement. Once it sticks, it’s hard to reposition!

✔ Smooth It Out – Use a credit card or squeegee to press out air bubbles from the center outward.

✔ Peel the Transfer Tape Slowly – After applying, gently peel off the clear transfer tape at a sharp angle. If the decal lifts, press it down and try again.

✔ Let It Cure – Avoid washing your car for at least 24 hours to let the adhesive fully set.

📍 Pro Tip: If applying in cold weather, use a hairdryer on low heat to warm up the surface for better adhesion!